Travelling to exotic places with cavity QED systems

Recent theoretical schemes for utilizing cavity QED models as quantum simulators are reviewed. By considering a quadrature representation for the fields, it is shown how Jahn-Teller models, effective Abelian or non-Abelian gauge potentials, transverse Hall currents, and relativistic effects naturally arise in these systems. Some of the analytical predictions are verified numerically using realistic experimental parameters taking into account for system losses. Thereby demonstrating their feasibility with current experimental setups.Comment: 5 pages, 3 figure

Dynamics of a Raman coupled model: entanglement and quantum computation

The evolution of a Raman coupled three-level lambda atom with two quantized cavity modes is studied in the large detuning case; i.e. when the upper atomic level can be adiabatically eliminated. Particularly the situation when the two modes are prepared in initial coherent or squeezed states, with a large average number of photons, is investigated. It is found that the atom, after specific interaction times, disentangles from the two modes, leaving them, in certain cases, in entangled Schrodinger cat states. These disentanglement times can be controlled by adjusting the ratio between average numbers of photons in the two modes. It is also shown how this effective model may be used for implementing quantum information processing. Especially it is demonstrated how to generate various entangled states, such as EPR- and GHZ-states, and quantum logic operations, such as the control-not and the phase-gate.Comment: 8 pages, 6 figure

Validity of adiabaticity in Cavity QED

This paper deals with the concept of adiabaticity for fully quantum mechanically cavity QED models. The physically interesting cases of Gaussian and standing wave shapes of the cavity mode are considered. An analytical approximate measure for adiabaticity is given and compared with numerical wave packet simulations. Good agreement is obtained where the approximations are expected to be valid. Usually for cavity QED systems, the large atom-field detuning case is considered as the adiabatic limit. We, however, show that adiabaticity is also valid, for the Gaussian mode shape, in the opposite limit. Effective semiclassical time dependent models, which do not take into account the shape of the wave packet, are derived. Corrections to such an effective theory, which are purely quantum mechanical, are discussed. It is shown that many of the results presented can be applied to time dependent two-level systems.Comment: 10 pages, 9 figure

Gravitational Radiation from Black Hole Binaries in Globular Clusters

A populations of stellar mass black hole binaries may exist in globular clusters. The dynamics of globular cluster evolution imply that there may be at most one black hole binary is a globular cluster. The population of binaries are expected to have orbital periods greater than a few hours and to have a thermal distribution of eccentricities. In the LISA band, the gravitational wave signal from these binaries will consist of several of the higher harmonics of the orbital frequency. A Monte Carlo simulation of the galactic globular cluster system indicates that LISA will detect binaries in 10 % of the clusters with an angular resolution sufficient to identify the host cluster of the binary.Comment: 7 pages, 2 eps figures, uses iopart styl

Research on metal solidification in zero-g state

The containerless solidification of several pure metals and metallic alloys was studied in a low gravity environment. The tests were performed in the MSFC 4.2 s drop tower using a rapid wire melting apparatus designed and built for this purpose. Pure iron and nickel, and alloys of iron-nickel, iron-carbon, nickel-aluminum and tungsten-rhenium were all melted and solidified at a gravity level of approximately 100.000/-4 g. Interpretation of the results has led to an appreciation of the factors controlling the successful execution of this drop test experiment and to a delineation of the limits of applicability of the apparatus. Preliminary metallurgical evaluations are presented of the overall shapes, lattice parameters, surface microstructure,, cross-sectional microstructures, solidification and transformation sequences, evaporative segregation, and localized solute redistribution observed in the low-gravity specimens. The effects of low gravity on metallic solidification are discussed with particular emphasis on observations of spontaneous undercooling and evaporative segregation in uncontained melts

Fast-ignition design transport studies: realistic electron source, integrated PIC-hydrodynamics, imposed magnetic fields

Transport modeling of idealized, cone-guided fast ignition targets indicates the severe challenge posed by fast-electron source divergence. The hybrid particle-in-cell [PIC] code Zuma is run in tandem with the radiation-hydrodynamics code Hydra to model fast-electron propagation, fuel heating, and thermonuclear burn. The fast electron source is based on a 3D explicit-PIC laser-plasma simulation with the PSC code. This shows a quasi two-temperature energy spectrum, and a divergent angle spectrum (average velocity-space polar angle of 52 degrees). Transport simulations with the PIC-based divergence do not ignite for > 1 MJ of fast-electron energy, for a modest 70 micron standoff distance from fast-electron injection to the dense fuel. However, artificially collimating the source gives an ignition energy of 132 kJ. To mitigate the divergence, we consider imposed axial magnetic fields. Uniform fields ~50 MG are sufficient to recover the artificially collimated ignition energy. Experiments at the Omega laser facility have generated fields of this magnitude by imploding a capsule in seed fields of 50-100 kG. Such imploded fields are however more compressed in the transport region than in the laser absorption region. When fast electrons encounter increasing field strength, magnetic mirroring can reflect a substantial fraction of them and reduce coupling to the fuel. A hollow magnetic pipe, which peaks at a finite radius, is presented as one field configuration which circumvents mirroring.Comment: 16 pages, 17 figures, submitted to Phys. Plasma

Subsonic tests of an all-flush-pressure-orifice air data system

The use of an all-flush-pressure-orifice array as a subsonic air data system was evaluated in flight and wind tunnel tests. Two orifice configurations were investigated. Both used orifices arranged in a cruciform pattern on the airplane nose. One configuration also used orifices on the sides of the fuselage for a source of static pressure. The all-nose-orifice configuration was similar to the shuttle entry air data system (SEADS). The flight data were obtained with a KC-135A airplane. The wind tunnel data were acquired with a 0.035-scale model of the KC-135A airplane. With proper calibration, several orifices on the vertical centerline of the vehicle's nose were found to be satisfactory for the determination of total pressure and angle of attack. Angle of sideslip could be accurately determined from pressure measurements made on the horizontal centerline of the aircraft. Orifice pairs were also found that provided pressure ratio relationships suitable for the determination of Mach number. The accuracy that can be expected for the air data determined with SEADS during subsonic orbiter flight is indicated

On the rotating wave approximation in the adiabatic limit

I revisit a longstanding question in quantum optics; When is the rotating wave approximation justified? In terms of the Jaynes-Cummings and Rabi models I demonstrate that the approximation in general breaks down in the adiabatic limit regardless of system parameters. This is explicitly shown by comparing Berry phases of the two models, where it is found that this geometrical phase is strictly zero in the Rabi model contrary to the non-trivial Berry phase of the Jaynes-Cummings model. The source of this surprising result is traced back to different topologies in the two models.Comment: 8 pages, 3 figure